In this post i am going to list out the steps to upgrade R12.1.1 to R12.1.3
NOTE: Please make a note that i
have not included pre and post patch steps while applying patches.
Please go-through the patch README’s carefully while applying patches…….
Step1:
Upgrade Database from 11.1.0.7 to 11gr2. I have upgraded from 11.1.0.7 to 11.2.0.2.
Following are the steps to upgrade 11.1.0.7 to 11.2.0.2 on R12.1.1
About Oracle Database Release Numbers
Oracle Database Upgrade Guide describes moving between different
releases of Oracle Database. Starting with Oracle9i Release 2 (9.2),
maintenance releases of Oracle Database are denoted by a change to the
second digit of a release number. In earlier releases, the third digit
indicated a particular maintenance release.
Figure 1–2 illustrates each part of a release number and what it represents.
Presently the database version is 11.1.0.7
The Upgrade process is divided into pre-upgrade, Upgrade and Post Upgrade.
1.Pre-Upgrade
Step-1
Check for oratab entry in /etc/oratab
Install 11gR2(11.2.0.2) Software only in new location
Create new location
mkdir –p /u01/oracle/RACDB/db/tech_st/11.2.0
Parallely Run Gather Dictionary Stats
Once we finish above. Let’s start installing 11.2.0.2 Oracle Software in new location /u01/oracle/RACDB/tech_st/db/11.2.0/
*Note: Don’t set DB environment during the installation of 11.2.0.2 Software.*
Download
p10098816_112020_Linux-x86-64_1of7.zip
p10098816_112020_Linux-x86-64_2of7.zip
unzip both the files in same location
Install 11gR2 Pre-req patches using YUM
yum install oracle-rdbms-server-11gR2-preinstall
Execute runinstaller
Now go to /tmp/CVU_11.2.0.2
And execute ./
runfixup.sh
Now take a count of Invalid Objects
SQL> select OWNER,OBJECT_NAME,OBJECT_TYPE from dba_objects where STATUS=’INVALID’;
I will execute
utlrp.sql or below package to compile invalid objects
exec utl_recomp.recomp_parallel(10);
From the above Screenshot we are going to apply
- 11g Release 2 interoperability patch for Release 12.1 (9062910)
- 12.1 TXK Delta 3 patch (8919489)
- 9868229
- 10163753
- 11071569
Put Application under Maintenance using adadmin and start applying the above patches
Apply patch 6400501 (conditional)
If you are on a UNIX/Linux platform, apply the 10.1.0.5 version of patch
6400501 to the iAS 10.1.2 Applications tier Oracle home.
| Note: For Linux x86-64 environments, download the Linux 32-bit
version of the patch as the Applications tier Oracle home is 32-bit. |
Update application tier context file with new database listener port number (conditional)
The new 11.2.0 Oracle home uses its own database listener for the
database instance, replacing the current database listener. Use the
Context Editor to update the following variables in the Applications
context file on each application tier server node to reflect the 11.2.0
configuration:
| Variable Name |
Value |
| s_dbhost |
New database hostname |
| s_dbdomain |
New database domain name |
| s_db_serv_sid |
New database SID |
| s_dbport |
New database listener port |
| s_apps_jdbc_connect_descriptor |
NULL |
Database Installation:
Prepare to create the 11.2.0 Oracle home
The 11.2.0 Oracle home must be installed on the database server node
in a different directory than the current Oracle home Read Chapters 1
and 2 of the Oracle Database Installation Guide 11g Release 2 (11.2) for
your platform. also read Chapter 1 and the “System Considerations and
Requirements” section of Chapter 3 of the
Oracle Database Upgrade Guide 11g Release 2 (11.2).
Make sure you thoroughly understand the installation and upgrade
processes. Perform any step that is relevant for your environment.
| Attention: For HP Itanium and HP PA RISC platforms using the NFS
file system, choose a disk to install the 11g Oracle home separate from
the database files. The mount options of the disk containing the
database files must include forcedirectio. The 11g Oracle home (or any
other binaries) must not include the forcedirectio mount option. |
Install Oracle Database 11g Products from the 11g Examples CD
On the database server node, as the owner of the Oracle RDBMS file
system and database instance, perform the tasks in section 4, “Download
Oracle Database Examples” in the Oracle Database Examples CD
Installation Guide.
In the Installation Types window, use the Product Languages button to
select any languages other than American English that are used by your
Applications database instance.
After the installation, make sure that:
The ORACLE_BASE environment variable must be set accordingly.
The ORACLE_HOME environment variable points to the new 11.2.0 Oracle home.
The PATH environment variable includes $ORACLE_HOME/bin and the
directory where the new perl executable is located (usually
$ORACLE_HOME/perl/bin).
The LD_LIBRARY_PATH environment variable includes $ORACLE_HOME/lib.
The PERL5LIB environment variable points to the directories where the
new perl libraries are located (usually $ORACLE_HOME/perl/lib/[perl
version] and $ORACLE_HOME/perl/lib/site_perl/[perl version])
ExamplesCD: p10098816_112020_Linux-x86-64_6of7.zip
Download and apply above examples CD on 11202 Database Software:
The ORACLE_BASE environment variable must be set accordingly.
The ORACLE_HOME environment variable points to the new 11.2.0 Oracle home.
The PATH environment variable includes $ORACLE_HOME/bin and the
directory where the new perl executable is located (usually
$ORACLE_HOME/perl/bin).
The LD_LIBRARY_PATH environment variable includes $ORACLE_HOME/lib.
The PERL5LIB environment variable points to the directories where the
new perl libraries are located (usually $ORACLE_HOME/perl/lib/[perl
version] and $ORACLE_HOME/perl/lib/site_perl/[perl version])
export ORACLE_BASE=/u01/oracle/RACDB/
export ORACLE_HOME=/u01/oracle/RACDB/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=/u01/oracle/RACDB/db/tech_st/11.2.0/lib
Create nls/data/9idata directory
On the database server node, as the owner of the Oracle RDBMS file
system and database instance, run the
$ORACLE_HOME/nls/data/old/cr9idata.pl script to create the
$ORACLE_HOME/nls/data/9idata directory.
After creating the directory, make sure that the ORA_NLS10
environment variable is set to the full path of the 9idata directory
whenever you enable the 11g Oracle home.
mkdir -p $ORACLE_HOME/nls/data/9idata
run the $ORACLE_HOME/nls/data/old/cr9idata.pl
[oracle@r12-rac1 ~]$ cd $ORACLE_HOME
[oracle@r12-rac1 11.2.0]$ cd nls/data/old/
[oracle@r12-rac1 old]$ perl cr9idata.pl
Directory /u01/oracle/RACDB/db/tech_st/11.2.0/nls/data/9idata already exist. Overwriting…
Copying files to /u01/oracle/RACDB/db/tech_st/11.2.0/nls/data/9idata…
Copy finished.
Please reset environment variable ORA_NLS10 to /u01/oracle/RACDB/db/tech_st/11.2.0/nls/data/9idata!
[oracle@r12-rac1 old]$ export ORA_NLS10=/u01/oracle/RACDB/db/tech_st/11.2.0/nls/data/9idata
Apply additional 11.2.0.2 RDBMS patches
Apply the following patches:
For all UNIX/Linux platforms:
4247037
10149223
10160615
10229719
12400751
12942119
13001379
13004894
Run utlu112i.sql on existing 11.1.0.7 oracle database
11.1.0.7—/u01/oracle/RACDB/db/tech_st/11.1.0
11.2.0.2—/u01/oracle/RACDB/db/tech_st/11.2.0
Copy
utlu112i.sql from 11.2.0 Orace Home
cd /u01/oracle/RACDB/db/tech_st/11.2.0/rdbms/admin
cp utlu112i.sql $HOME
SQL> @utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 11-12-2013 21:14:59
Script Version: 11.2.0.2.0 Build: 001
.
**********************************************************************
Database:
**********************************************************************
--> name: RACDB
--> version: 11.1.0.7.0
--> compatible: 11.1.0
--> blocksize: 8192
--> platform: Linux x86 64-bit
--> timezone file: V10
.
**********************************************************************
Tablespaces: [make adjustments in the current environment]
**********************************************************************
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 11003 MB
--> CTXD tablespace is adequate for the upgrade.
.... minimum required size: 16 MB
--> ODM tablespace is adequate for the upgrade.
.... minimum required size: 10 MB
--> APPS_UNDOTS1 tablespace is adequate for the upgrade.
.... minimum required size: 853 MB
--> APPS_TS_TX_DATA tablespace is adequate for the upgrade.
.... minimum required size: 5254 MB
--> APPS_TS_QUEUES tablespace is adequate for the upgrade.
.... minimum required size: 79 MB
WARNING: --> SYSAUX tablespace is not large enough for the upgrade.
.... currently allocated size: 446 MB
.... minimum required size: 506 MB
.... increase current size by: 60 MB
.... tablespace is NOT AUTOEXTEND ENABLED.
.
**********************************************************************
Flashback: OFF
**********************************************************************
**********************************************************************
Update Parameters: [Update Oracle Database 11.2
init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
**********************************************************************
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
-- No update parameter changes are required.
.
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
-- No update parameter changes are required.
.
**********************************************************************
Renamed Parameters: [Update Oracle Database 11.2
init.ora or spfile]
**********************************************************************
-- No renamed parameters found. No changes are required.
.
**********************************************************************
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2
init.ora or spfile]
**********************************************************************
--> plsql_native_library_dir 11.2 OBSOLETE
--> plsql_native_library_subdir_ 11.2 OBSOLETE
.
**********************************************************************
Components: [The following database components will be upgraded or installed]
**********************************************************************
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java [upgrade] VALID
--> Real Application Clusters [upgrade] INVALID
--> OLAP Analytic Workspace [upgrade] VALID
--> OLAP Catalog [upgrade] VALID
--> Oracle Text [upgrade] VALID
--> Oracle XML Database [upgrade] VALID
--> Oracle Java Packages [upgrade] VALID
--> Oracle interMedia [upgrade] VALID
--> Spatial [upgrade] VALID
--> Data Mining [upgrade] VALID
--> Oracle OLAP API [upgrade] VALID
.
**********************************************************************
Miscellaneous Warnings
**********************************************************************
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 11.1.0.7.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Your recycle bin contains 1724 object(s).
.... It is REQUIRED that the recycle bin is empty prior to upgrading
.... your database. The command:
PURGE DBA_RECYCLEBIN
.... must be executed immediately prior to executing your upgrade.
WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
.
**********************************************************************
Recommendations
**********************************************************************
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following command
while connected as SYSDBA:
EXECUTE dbms_stats.gather_dictionary_stats;
**********************************************************************
Oracle recommends removing all hidden parameters prior to upgrading.
To view existing hidden parameters execute the following command
while connected AS SYSDBA:
SELECT name,description from SYS.V$PARAMETER WHERE name LIKE '\_%' ESCAPE '\'
Changes will need to be made in the
init.ora or spfile.
**********************************************************************
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2 WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the
init.ora or spfile.
**********************************************************************
The DMSYS schema exists in the database. Prior to performing an
upgrade Oracle recommends that the DMSYS schema, and its associated
objects be removed from the database.
Refer to the Oracle Data Mining Administration Guide for the
instructions on how to perform this task.
**********************************************************************
1
WARNING: –> SYSAUX tablespace is not large enough for the upgrade.
…. currently allocated size: 446 MB
…. minimum required size: 506 MB
…. increase current size by: 60 MB
…. tablespace is NOT AUTOEXTEND ENABLED.
1
SOLUTION:
ALTER DATABASE DATAFILE'/u01/oracle/RACDB/db/apps_st/data/sysaux02.dbf' RESIZE 1G;
2 Comment the below parameters in init.ora file
--> plsql_native_library_dir 11.2 OBSOLETE
--> plsql_native_library_subdir_ 11.2 OBSOLETE
3
WARNING: –> Your recycle bin contains 1724 object(s).
…. It is REQUIRED that the recycle bin is empty prior to upgrading
…. your database. The command:
PURGE DBA_RECYCLEBIN
SOLUTION:
Find and Comment all hidden parameters prior to upgrading.
SELECT name,description from SYS.V$PARAMETER WHERE name LIKE ‘\_%’ ESCAPE ‘\’
2.Upgrade
Shutdown the 11.1.0.7 DATABASE open a new terminal
Set the new environment
export ORACLE_BASE=/u01/oracle/RACDB/
export ORACLE_HOME=/u01/oracle/RACDB/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/lib/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/RACDB/db/tech_st/11.2.0/nls/data/9idata
run dbua
Simultaneously Check for count of invalids, it will be reducing.
So we are done with the upgrade.
POST Upgrade
1.Copy $APPL_TOP/admin/
adgrants.sql (
adgrants_nt.sql
for Windows) from the administration server node to the database server
node. Use SQL*Plus to connect to the database as SYSDBA and run the
script using the following command:
- $ sqlplus “/ as sysdba” @adgrants.sql (or adgrants_nt.sql)
[
APPS schema name]
| Note: Verify the usage of adgrants.sql in the adgrants.sql script. Older versions of adgrants.sql require the APPLSYS schema name parameter to be passed instead of APPS. |
In this case i have copied the
adgrants.sql in /tmp
2.Re-create grants and synonyms using adadmin and then compile apps schema this will help us in reducing the
no.of invalids.
After Upgrade the
no.of invalids
After running recreate grants and synonyms and compile apps schema the invalid count is
This is really good as we dont have any invalids before or after
Upgrade. Even if there are any invalids it should be same when compared
to before upgrade. If we get any invalids then we should raise an SR and
work on it.
3.When we applied 11.2.0.2 additional patches there were some post patch steps, that has to be taken care.
a) 4247037
Post install steps:
cd $ORACLE_HOME/md/admin
connect to the database using sqlplus / as sysdba
sqlplus> @catmgdidcode
b) 9858539
Post install steps:
Run following files as sysdba
cd $ORACLE_HOME/rdbms/admin
@
catnomtt.sql
@
catnomta.sql
@
dbmsmeta.sql
@
dbmsmeti.sql
@
dbmsmetu.sql
@
dbmsmetb.sql
@
dbmsmetd.sql
@dbmsmet2.sql
@
catmeta.sql
@
prvtmeta.plb
@
prvtmeti.plb
@
prvtmetu.plb
@
prvtmetb.plb
@
prvtmetd.plb
@prvtmet2.plb
@catmet2.sql
– recompile dbms_metadata_int to enable the diffing code
alter package dbms_metadata_int compile plsql_ccflags = ‘ku$xml_enabled:true';
– recompile dbms_metadata_util to enable the xmlschema load code
alter package dbms_metadata_util compile plsql_ccflags = ‘ku$xml_enabled:true';
5.Grant create procedure privilege on CTXSYS
Copy $AD_TOP/patch/115/sql/
adctxprv.sql
from the administration server node to the database server node. Use
SQL*Plus to connect to the database as APPS and run the script using the
following command:
$ sqlplus apps/[
APPS password] @
adctxprv.sql \
[
SYSTEM password] CTXSYS
6.Set CTXSYS parameter
Use SQL*Plus to connect to the database as SYSDBA and run the following command:
$ sqlplus “/ as sysdba”
SQL> exec ctxsys.ctx_adm.set_parameter(‘file_access_role’, ‘public’);
7.
Deregister the current database server (conditional)
If you plan to change the database port, host, SID, or database name
parameter on the database server, you must also update AutoConfig on the
database tier and deregister the current database server node.
Use SQL*Plus to connect to the database as APPS and run the following command:
$ sqlplus apps/[APPS password]
SQL> exec fnd_conc_clone.setup_clean;
- Implement and run AutoConfig:
Implement and run AutoConfig in the new Oracle home on the database
server node. If the database listener of the new Oracle home is defined
differently than the old Oracle home, you must also run AutoConfig on
each application tier server node to update the system with the new
listener.
On the applciation side run
admkappsutil.pl to generate
admkappsutil.zip file
copy this
admkappsutil.zip to new 11.2.0.2 Oracle Home and unzip then run autoconfig this makes our new oracle home autoconfig enabled.
See
Using AutoConfig to Manage System Configurations with Oracle E-Business Suite Release 12 on
My Oracle Support for instructions on how to implement and run
AutoConfig. Section 3.2 explains how to generate a context file on the
database tier.
Shut down all processes, including the database and the listener, and restart them to load the new environment settings.
| Attention: For Windows customers, after creating the XML
context file, ensure that the variable s_dlsnname has the proper
listener service name. |
| Attention: After creating the XML context file, ensure the
variable s_jretop points to $ORACLE_HOME/jdk/jre and is not altered to
any other value. |
- Apply post-upgrade ECX patch
If you are on E-Business Suite Release 12.0, apply ECX
Patch 9922442. If you are on E-Business Suite Release 12.1, apply
Patch 9151516.
- Gather statistics for SYS schema
Copy $APPL_TOP/admin/
adstats.sql from the administration server node to the database server node. Note that
adstats.sql has to be run in restricted mode. Use SQL*Plus to connect to the database as SYSDBA and use the following commands to run
adstats.sql in restricted mode:
$ sqlplus “/ as sysdba”
SQL> alter system enable restricted session;
SQL> @
adstats.sql
$ sqlplus “/ as sysdba”
SQL> alter system disable restricted session;
SQL> exit;
11.
Restart Applications server processes
Remove the Maintenance mode and Restart all the Application tier
server processes that you shut down previously. Remember that the Oracle
Net listener for the database instance, as well as the database
instance itself, need to be started in the 11.2 Oracle home. Users may
return to the system.
Now check the DB version from frontend…..
We are able to successfully upgrade the database from 11.1.0.7 to 11.2.0.2
Step2:
Put the application under maintainence using adadmin
Step3.
Apply below patch
8919491.B Oracle Applications Technology 12.1.3 Product Family Release Update Pack
Step4
Apply Below Patch
17884289 R12.AD.B.Delta.4
Step5:
Apply Below Patch
9239090 R12 ORACLE E-BUSINESS SUITE 12.1.3 RELEASE UPDATE PACK
Step6:
Apply Below Patch
9239095. R12Oracle E-Business Suite Online Help for 12.1.3 Release Update Pack
Step7:
Apply Below Patch
9817770.BPOST-R12.ATG_PF.B.DELTA.3 CONSOLIDATED PATCH
Step8:
Apply Below patch
9966055.B1OFF:12.1.3:TRANSLATED VERSION OF FNDSCSGN NOT LAUNCHED
Step9:
Run AutoConfig on the APPL_TOP.
Step10:
Run the admkappsutil.pl utility to create the file appsutil.zip in the <INST_TOP>/admin/out directory.Step9:
Run AutoConfig on the APPL_TOP.
perl <AD_TOP>/bin/admkappsutil.pl
Step11:
Copy or FTP the appsutil.zip file to the <RDBMS ORACLE_HOME>.
Step12:
Uncompress appsutil.zip under the <RDBMS ORACLE_HOME>.
Step13:
unzip the appsutil.zip as below
unzip -o appsutil.zip
Step14:
Run AutoConfig on the <RDBMS ORACLE_HOME>.
Step15:
Re-run adpreclone.pl on the database tier and the application tier. Since updates included in Oracle E-Business
Suite Release 12.1.3 were applied to the system, adpreclone must be run again to apply the updates
to the clone directory structures that were used during cloning.
perl adpreclone.pl dbTier
perl adpreclone.pl appsTier
This finishes the Application upgrade.
Start the Application Tier Services.
NOTE:After finishing the application upgrade. we need to apply product family patches.
(IN THIS UPGRADE I DIDNT APPLIED BELOW PRODUCT SPECIFIC PATCHES)
In this post I will list out the steps required to Upgrade R12 10.1.3.4 Oracle Home to 10.1.3.5.
Step 1
Download OracleAS 10g Release 3 (10.1.3) Patch Set 5 (10.1.3.5.0)
Download OracleAS 10g Release 3 (10.1.3) Patch Set 5 (10.1.3.5.0) delivered via Patch
8626084 from My Oracle Support
Step 2
Download Environment Preparation Patch for OracleAS 10g Release 3 (10.1.3) Patch Set 5 (10.1.3.5.0)
Download patch
8920270 from My Oracle Support
.
Also download latest opatch 6880880 for 10.1.3
Step 3
Take a cold backup of 10.1.3 Oracle Home and Inventory
cp -pr 10.1.3 10.1.3_bkp
Step 4
Shut down the application Tier
Step 5
Set your environment (Remember dont run the regular application env
file). Instead go to $INST_TOP/ora/10.1.3 and u will find and env with
name <SID>
_DomainName.env set the env using this env file.
Before Upgrade the version is as below
use$IAS_ORACLE_HOME/Apache/Apache/bin/httpd -version
Step 6:
unzip p8626084_101350_LINUX.zip
cd Disk1
execute ./
runInstaller.sh
Here if you are trying to upgrade on Linux64bit Machine you will face an error, i suggest run below command
On
Linux 64bit:
Use the following command to specify 32bit shell emulation, before running the installer as detailed below:
$ linux32 bash
then again execute the ./
runInstaller.sh
Choose Oracle Home 10.1.3( Make sure on process is running from this OH.) all the application services should be down.
type password as
oafm
Ignore if you see any error messages
Ignore the error Messages.
try opmnctl startall from command prompt to see whether you are able
to start it successfully or not. again stop using opmnctl stopall as we
need to apply other patches.
Step 7:
Unzip patch
8920270 (required patch for OracleAS 10g Release 3 (10.1.3) Patch Set 5 (10.1.3.5.0)) into an alternative temporary directory.
Go through the Readme.txt
1) Make a backup of the file $ORACLE_HOME/config/run_opatch_generic.sh
cd $ORACLE_HOME/config
cp run_opatch_generic.sh run_opatch_generic.sh.pre8920270
2) Edit the $ORACLE_HOME/config/run_opatch_generic.sh and add the line
"-ocmrf <$ORACLE_HOME>/config/ias.properties" immediately after the -silent
switch. i.e.
#!/bin/sh
#
#opatch apply -silent -oh <ORACLE_HOME> -invPtrLoc <OH/oraInst.loc> <opatch dir>#
# This file is really for SOLARIS only currently other platforms are
# using separate files.
<oracle_home>/OPatch/opatch apply -silent -ocmrf <oracle_home>/config/ias.properties -oh <oracle_home> -invPtrLoc <oracle_home>/oraInst.loc <oracle_home>/opatches/4601861
if [ "$?" != "0" ]; then
echo "OPatch did not complete successfully..."
exit 1
fi
3) If this is a GUI install then retry the configuration assistant "Run One-off Generic OPatches". For a failure in the silent install
a) Set the LD_LIBRARY_PATH
$ export LD_LIBRARY_PATH=$ORACLE_HOME/lib32:$ORACLE_HOME/lib
b) Set the PERL5LIB
export PERL5LIB=$ORACLE_HOME/perl/lib/5.6.1:$PERL5LIB
c) Run the configToolCommands
cd $ORACLE_HOME/cfgtoollogs
./configToolCommands > /tmp/configtoolcommands.out
d) Review /tmp/configtoolcommands.out.
Step 8
Run AutoConfig
Step 9
Apply post upgrade patches
Step 10 Post-upgrade Tasks
Step a: Regenerate
appsborg.zip and appsborg2.zip files
Run adadmin, and choose Generate product JAR files (with the no force option) to generate the
appsborg.zip and appsborg2.zip files.
Step b :Verify the OracleAS 10g Release 3 (10.1.3) Patch Set 5 (10.1.3.5) Installation
This finishes the upgrade of 10.1.3 to 10.1.3.5.
